 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| XBA170 DUAL POLE OptoMOS(R) Relay Load Voltage Load Current Max RON XBA170 350 100 50 Units V mA Description XBA170 is 350V, 100mA, 50 independent 1-Form-A and 1-Form-B relays. It provides an economical solution where cost is critical and high performance is not a necessity. Features * Small 8 Pin DIP Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * 3750VRMS Input/Output Isolation * FCC Compatible * VDE Compatible * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Surface Mount and Tape & Reel Versions Available Approvals * UL Recognized: File Number E76270 * CSA Certified: File Number LR 43639-10 * BSI Certified to: * BS EN 60950:1992 (BS7002:1992) Certificate #: 7344 * BS EN 41003:1993 Certificate #: 7344 Ordering Information Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hookswitch * Dial Pulsing * Ground Start * Ringer Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment-Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Part # XBA170 XBA170P XBA170PTR XBA170S XBA170STR Description 8 Pin DIP (50/ Tube) 8 Pin Flatpack (50/ Tube) 8 Pin Flatpack (1000/ Reel) 8 Pin Surface Mount (50/ Tube) 8 Pin Surface Mount (1000/ Reel) Pin Configuration XBA170 Pinout AC/DC Configuration + Control - Normally Closed - Control - Normally Closed + Control - Normally Open - Control - Normally Open 1 2 3 4 8 7 6 5 Normally Open Pole Normally Closed Pole Switching Characteristics of Normally Open (Form A) Devices 10ms CONTROL Switching Characteristics of Normally Closed (Form B) Devices 10ms CONTROL + 90% LOAD 10% + TON 10%+ TOFF 90% + +10% TOFF + 90% TON DS-XBA170-R2 www.clare.com 1 XBA170 Absolute Maximum Ratings (@ 25 C) Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Total Power Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature DIP Package Surface Mount Package (10 Seconds Max.) 1 2 Min 3750 -40 -40 - Typ Max Units - 1501 mW 50 mA 1 A 5 V - 8002 mW VRMS +85 C +125 C +260 +220 C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Derate Linearly 1.33 mw/C Derate Linearly 6.67 mw/C Electrical Characteristics Parameter Output Characteristics @ 25C Load Voltage (Peak) Load Current* (Continuous) AC/DC Configuration Peak Load Current On-Resistance AC/DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitanmce Capacitance Input to Output Input Characteristics @ 25C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Voltage Reverse Input Current Input to Output Capacitance Input to Output Isolation Conditions 10ms IL=120mA VL=350V IF=5mA, VL=10V IF=5mA, VL=10V 50V; f=1MHz IL=Load Current IF=5mA VR=5V Symbol VL IL ILPK RON ILEAK TON TOFF COUT IF IF VF VR IR CI/O VI/O Min 1 1 5 0.4 0.9 3750 Typ 33 25 3 0.7 1.2 3 Max 350 100 350 50 1 5 5 50 1.4 5 10 Units V mA mA A ms ms pF pF mA mA V V A pF VRMS 2 www.clare.com Rev. 2 XBA170 PERFORMANCE DATA* XBA170 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25C; IF = 5mADC) 35 30 Device Count (N) 25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) Device Count (N) 25 20 15 10 5 0 XBA170 - FormA Typical On-Resistance Distribution (N=50 Ambient Temperature = 25C) (Load Current = 100mADC, IF=5mADC) 25 20 15 10 5 0 XBA170 - FormB Typical On-Resistance Distribution (N=50 Ambient Temperature = 25C) (Load Current = 100mADC, IF=5mADC) Device Count (N) 29.09 29.86 30.63 31.40 32.16 32.93 33.70 On-Resistance () 30.59 31.36 32.13 32.90 33.66 34.43 35.20 On-Resistance () XBA170 - FormA Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25C) 25 20 15 10 5 0 424.0 429.3 434.5 439.7 444.9 450.1 455.4 Blocking Voltage (V) 25 20 15 10 5 0 XBA170 - FormB Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25C) 25 20 15 10 5 0 424.0 429.3 434.5 439.7 444.9 450.1 455.4 Blocking Voltage (V) XBA170 - FormA Typical IF for Switch Operation (N=50 Ambient Temperature = 25C) (Load Current = 100mADC) Device Count (N) Device Count (N) Device Count (N) 0.44 0.50 0.56 0.62 0.69 0.75 0.81 LED Current (mA) XBA170 - FormB Typical IF for Switch Operation (N=50 Ambient Temperature = 25C) (Load Current = 100mADC) 25 20 15 10 5 0 0.44 0.50 0.56 0.62 0.69 0.75 0.81 LED Current (mA) 25 20 15 10 5 0 XBA170 - FormA Typical IF for Switch Dropout (N=50 Ambient Temperature = 25C) (Load Current = 100mADC) 25 20 15 10 5 0 XBA170 - FormB Typical IF for Switch Dropout (N=50 Ambient Temperature = 25C) (Load Current = 100mADC) Device Count (N) Device Count (N) Device Count (N) 0.44 0.50 0.56 0.62 0.69 0.75 0.81 0.44 0.50 0.56 0.62 0.69 0.75 0.81 LED Current (mA) LED Current (mA) 25 20 15 10 XBA170 - FormA Typical Turn-On Time (N=50 Ambient Temperature = 25C) (Load Current = 100mADC; IF = 5mADC) 25 20 15 10 XBA170 - FormB Typical Turn-On Time (N=50 Ambient Temperature = 25C) (Load Current = 100mADC; IF = 5mADC) 25 20 15 10 XBA170 - FormA Typical Turn-Off Time (N=50 Ambient Temperature = 25C) (Load Current = 100mADC; IF = 5mADC) Device Count (N) Device Count (N) 5 0 0.67 0.75 0.83 0.91 0.99 1.06 1.14 Turn-On (ms) 5 0 0.11 0.14 0.17 0.19 0.22 0.25 0.28 Turn-On (ms) Device Count (N) 5 0 0.11 0.14 0.17 0.19 0.22 0.25 0.28 Turn-Off (ms) The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 2 www.clare.com 3 XBA170 PERFORMANCE DATA* XBA170 - FormB Typical Turn-Off Time (N=50 Ambient Temperature = 25C) (Load Current = 100mADC; IF = 5mADC) 160 140 Load Current (mA) 120 100 80 60 40 20 0 0.67 0.75 0.83 0.91 0.99 1.06 1.14 Turn-Off (ms) 0 -40 -20 0 20 40 60 80 100 120 Temperature (C) 20mA 10mA 5mA Load Current (mA) Device Count (N) 20 15 10 5 XBA170 - Form A Typical Load Current vs. Temperature 160 140 120 100 80 60 40 20 0 XBA170 - Form B Typical Load Current vs. Temperature 25 5mA -40 -20 0 20 40 60 80 100 120 Temperature (C) XBA170 Typical Leakage vs. Temperature (Measured across Pins 5 & 6 or 7 & 8) 0.016 0.014 Leakage (A) 0.012 0.010 0.008 0.006 0.004 0.002 0 -40 -20 0 20 40 60 80 100 Temperature (C) Blocking Voltage (VRMS) XBA170 - FormA Typical Blocking Voltage vs. Temperature 455 450 445 440 435 430 425 420 -40 -20 0 20 40 60 80 100 Temperature (C) Blocking Voltage (VRMS) XBA170 - FormB Typical Blocking Voltage vs. Temperature 455 450 450 440 435 430 425 420 -40 -20 0 20 40 60 80 100 Temperature (C) XBA170 - FormA Typical Turn-On vs. Temperature (Load Current = 100mADC) 1.8 1.6 1.4 Turn-On (ms) XBA170 - FormB Typical Turn-On vs. Temperature (Load Current = 100mADC) 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 -40 -20 0 20 40 60 80 Temperature (C) 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 -40 XBA170 - FormA Typical Turn-Off vs. Temperature (Load Current = 100mADC) 5mA 1.2 1.0 0.8 0.6 0.4 0.2 0 -40 -20 0 20 40 60 80 100 120 Temperature (C) 10mA 20mA Turn-On (ms) Turn-Off (ms) 5mA 5mA 100 120 -20 0 20 40 60 80 100 120 Temperature (C) LED Forward Voltage Drop (V) XBA170 - FormB Typical Turn-Off vs. Temperature (Load Current = 100mADC) 1.8 1.6 1.4 Turn-Off (ms) 1.2 1.0 0.8 0.6 0.4 0.2 0 -40 -20 0 20 40 60 80 100 120 Temperature (C) 10mA 5mA XBA170 Typical LED Forward Voltage Drop vs. Temperature 1.8 1.6 XBA170 - FormA Typical Turn-On vs. LED Forward Current (Load Current = 100mADC) 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) 1.2 1.0 0.8 -40 -20 0 20 40 60 80 20mA 50mA 30mA 20mA 10mA 5mA 100 120 Temperature (C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Turn-On (ms) 1.4 4 www.clare.com Rev. 2 XBA170 PERFORMANCE DATA* XBA170 - FormB Typical Turn-On vs. LED Forward Current (Load Current = 100mADC) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) XBA170 - FormA Typical Turn-Off vs. LED Forward Current (Load Current = 100mADC) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) XBA170 - FormB Typical Turn-Off vs. LED Forward Current (Load Current = 100mADC) 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) Turn-On (ms) Turn-Off (ms) Turn-Off (ms) XBA170 - FormA Typical On-Resistance vs. Temperature (Load Current = 100mADC; IF = 5mADC) 70 60 On-Resistance () On-Resistance () 50 40 30 20 10 0 -40 -20 0 20 40 60 80 100 120 Temperature (C) XBA170 - FormB Typical On-Resistance vs. Temperature (Load Current = 100mADC; IF = 5mADC) 70 60 50 40 30 20 10 0 -40 -20 0 20 40 60 80 100 120 Temperature (C) LED Current (mA) XBA170 - FormA Typical IF for Switch Operation vs. Temperature (Load Current = 100mADC) 6.0 5.0 4.0 3.0 2.0 1.0 0 -40 -20 0 20 40 60 80 100 120 Temperature (C) XBA170 - FormB Typical IF for Switch Operation vs. Temperature (Load Current = 100mADC) 6.0 5.0 LED Current (mA) LED Current (mA) 4.0 3.0 2.0 1.0 0 -40 -20 0 20 40 60 80 100 120 Temperature (C) XBA170 - FormA Typical IF for Switch Dropout vs. Temperature (Load Current = 100mADC) 6.0 5.0 4.0 3.0 2.0 1.0 0 -40 -20 0 20 40 60 80 100 120 Temperature (C) LED Current (mA) XBA170 - FormB Typical IF for Switch Dropout vs. Temperature (Load Current = 100mADC) 6.0 5.0 4.0 3.0 2.0 1.0 0 -40 -20 0 20 40 60 80 100 120 Temperature (C) 120 100 80 60 40 20 0 -20 -40 -60 -80 -100 -120 XBA170 - FormA Typical Load Current vs. Load Voltage (Ambient Temperature = 25C) IF = 5mADC Load Current (mA) -4 -3 -2 -1 0 1 2 3 4 120 100 80 60 40 20 0 -20 -40 -60 -80 -100 -120 XBA170 - FormB Typical Load Current vs. Load Voltage (Ambient Temperature = 25C) IF = 5mADC XBA170 Energy Rating Curve 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10s 100s 1ms 10ms 100ms Time Load Current (mA) -4 -3 -2 -1 0 1 2 3 4 Load Current (A) 1s 10s 100s Load Voltage (V) Load Voltage (V) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 2 www.clare.com 5 XBA170 Mechanical Dimensions 8 Pin DIP Through Hole (Standard) 7.620 .254 (.300 .010) 3.302 (.130) 9.144 TYP. (.360) 6.350 .127 (.250 .005) 9.652 .381 (.380 .015) 2.540 .127 (.100 .005) PC Board Pattern (Top View) 2.540 .127 8-.800 DIA. (.100 .005) (8-.031 DIA.) 7.620 .127 (.300 .005) 7.239 TYP. (.285) 9.144 .508 (.360 .020) 6.350 .127 (.250 .005) .457 .076 (.018 .003) 8.077 .127 (.318 .005 ) 7.620 .127 (.300 .005) 8 Pin DIP Surface Mount ("S" Suffix) 7.620 .254 (.300 .010) 4.445 .127 (.175 .005) 3.302 (.130) .635 TYP. (.025) .254 TYP. (.010) 6.350 .127 (.250 .005) 9.652 .381 (.380 .015) 2.540 .127 (.100 .005) PC Board Pattern (Top View) 2.540 .127 (.100 .005) 9.525 .254 (.375 .010) 1.905 .127 (.075 .005) .457 .076 (.018 .003) 8.077 .127 (.318 .005) 1.498 .127 (.059 .005) 8.305 .127 (.327 .005) 8 Pin Flatpack ("P" Suffix) 9.652 .381 (.380 .015) 2.540 .127 (.100 .005) PC Board Pattern (Top View) 2.540 .127 (.100 .005) 9.398 .127 (.370 .005) 2.159 TYP. (.085) 7.620 .254 (.300 .010) 6.350 .127 (.250 .005) .203 (.008) .457 .076 (.018 .003) 8.077 .127 (.318 .005) 1.193 (.047) 2.286 MAX. .635 .127 (.090) (.025) 8.763 .127 (.345 .005) .787 (.031) Dimensions mm (inches) 6 www.clare.com Rev. 2 XBA170 Mechanical Dimensions Tape and Reel Packaging for 8 Pin Surface Mount Package 330.2 DIA. (13.00) Top Cover Tape Thickness .102 MAX. (.004) 2.007 .102 1.498 .102 3.987 .102 (.079 .004) (.059 .004) (.157 .004) 6.731 MAX. 1.753 .102 (.265) (.069 .004) .406 MAX. (.016) 7.493 .102 (.295 .004) 12.090 (.476) 4.877 (.192) 1 8 16.002 .305 (.630 .012) 10.300 (.405) Embossed Carrier Top Cover Tape .050R TYP. 11.989 .102 (.472 .004) User Direction of Feed 10.300 .102 (.405 .004) 1.549 .102 (.061 .004) Embossment Tape and Reel Packaging for 8 Pin Flatpack Package 330.2 DIA. (13.00) 2.007 .102 1.498 .102 3.987 .102 (.079 .004) (.059 .004) (.157 .004) Top Cover Tape Thickness .102 MAX. (.004) 6.731 MAX. 1.753 0.102 (.265) (.069 .004) .406 MAX. (.016) 7.493 .102 (.295 .004) 1 8 16.002 .305 (.630 .012) 10.287 (.405) 12.090 (.476) 4.877 (.192) Embossed Carrier Top Cover Tape .050R TYP. 11.988 .102 (.472 .004) User Direction of Feed 10.287 .102 (.405 .004) 1.549 .102 (.061 .004) Embossment Dimensions mm (inches) Rev. 2 www.clare.com 7 Worldwide Sales Offices CLARE LOCATIONS Clare Headquarters 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Clare Micronix Division 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 EUROPE European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 France Clare France Sales Lead Rep 99 route de Versailles 91160 Champlan France Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12 85077 Manching Germany Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spanga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797 ASIA/PACIFIC Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369 SALES OFFICES AMERICAS Americas Headquarters Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare P.O. Box 856 Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare 1852 West 11th Street, #348 Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 http://www.clare.com Clare cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this Clare product. No circuit patent licenses nor indemnity are expressed or implied. Clare reserves the right to change the specification and circuitry, without notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct physical harm, injury or death to a person. Specification: DS-XBA170-R2 (c)Copyright 2000, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 2/15/01 |
Price & Availability of XBA170S
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |